Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Current »

  1. Download the "Latest Update Tarball" for your RediGate 100 Series or 400 Series device from http://redigate.elecsyscorp.com
  2. Open up your device's configuration using ACE
  3. Select "File → Upload XML to Device", and make sure the "Upload additional file(s)" box is checked


    Do not change tar filename

    In order for the .tar to be properly installed, you must upload the file with its original filename. Uploading a file with a space in it (such as 2017-01-03-1400-RegiGate_400_7_ZEUS_3.12_07(1).tar.gz ) will prevent the RediGate from properly installing the update, and may cause issues with future updates.

  4. Click "Upload", "Add File", and then select the downloaded tar.gz file
  5. After the upload, you device will reset and contain the latest firmware

    Confirm Software Version

    You can confirm the version of software on your RediGate by logging into Putty. The screenshot below shows a RediGate with V:5.7.2016-12-29-1000:

  • No labels