Skip to end of metadata
Go to start of metadata

The steps below show how to use the RediGate MMI access the RTDB values of the RTU's in the RediGate's current configuration

  1. Log in to the RediGate MMI via (see Setting up Putty for Network Communication or Setting up PuTTY for Serial Communication for info on accessing the MMI)
  2. Enter commands 3 → 18 → (Channel Number) → (RTU Number) → (RTDB Address) → (Point Count) → "F"

 

The above screenshots show the formatted values for registers 30001 - 300010 in VirtualRW (RTU 4) in Channel 15